Following from part 1 where we stripped down the enclosure we are now ready to apply the veneer.
The veneer we are using is ash wood from Veneers Online – Link here. It comes on a 250x30cm roll which is enough to do 2 speakers if so desired.
It is quite time consuming as you need to apply varnish, wait for it to dry, sand it down and repeat a few times to get a good finish but the end result is worth it.
I am working on a custom SnapCast based home system which will allow you to set speakers as left, right, mono or stereo so I may build another one of these so I have a stereo pair. I have another identical speaker and all the PCBs and components. Will see how this one turns out first
Leave a Reply